7 Essential Tips for Installing LED Downlights

7 Essential Tips for Installing LED Downlights

LED lights have replaced the traditional lighting fixtures that used to hang down the ceiling. The sleek and elegant design of LED downlights has made them a popular choice nowadays. These lights shine out from the ceiling and have no visible fixtures providing a minimalist look.

Installing these lights saves you from the hassle of replacing lights every now and then. However, it is important to install them correctly for perfect lighting and safety. An LED light can only partly light up a room thereby multiple lights should be placed at the right distance to utilize space. Following these essential tips will save you from mishandling the LED downlights while installing them.

Check out with Experienced Electrician

The layout of lighting depends on how you want to light up the given space. Personal preference may change the number and placement of lights you are using. So, you may first check out with an experienced electrician to have a guideline to follow. He may guide you well about dividing up spaces separately to light them up according to the required tone. Patriot LED is a great choice for having valuable insights about efficient products for the given space. Their representatives attend the customers with care and guide them in choosing right lighting fixtures from their plentiful products.

Calculate Wattage for Lighting up Space

Calculate the required wattage for lighting up the space so you may know how many LED downlights you will need. This is usually done by multiplying the square footage of the room by 1.5. Choose the right type of bulb and see its wattage. Divide the total wattage by the wattage of bulbs and you will know the number of lights to be installed. Also, it is wise to install more number of lower power LED lights to have an even distribution of light instead of higher power lights. It is true that LED downlights can only partly light up a room as the lumens and covering space is less. However, multiple lights placed in an area enable you to switch off or even dim the lights whenever you want.

Consider Ceiling Height

Ceiling height is a factor to be considered while placing LED downlights. Recessed lights produce a cone-shaped beam of l in the downward direction. This beam tends to intersect 30 inches above the floor for normal ceiling heights. However, you may want to choose higher wattage lights for taller ceiling to spread out light more evenly.

Keep Space From Ceiling Fans

Fan blades can become a barrier in between the illumination if the light placed within the running diameter. The flicker created by the blades will usually irritate the eye and be useless. It is highly recommended to keep space from the corners of the wall and fans to arrange lights perfectly.

Create a Balanced Look

The positioning of downlights is important to create a balanced look. This ensures that there are no shadows and the lights produce maximum light possible to brighten up the given space. The starting point should be at least 2 feet away from the edge of walls. It is then crucially important to distribute the lights evenly across the room.

Choose Dimmable LED Downlights

Make your lighting fixtures flexible so as to tune them according to your mood. Dimmer switches should be used to control lights in different zones. Also make sure to choose between cool white light and warm white light before you install light fixtures. This will save your time as you will have the right type of lights at the time of installation which will last longer without need of replacement.

Work on Beam Angles

Beam angles are important for task lighting. LED downlights with narrower beam angles will work well as spotlights over the area. Match beam angles for task lighting beforehand and install them as required. Installation of LED downlights with proper installation is a useful investment. Ideal spacing, wattage, type and color of the lights will give you the look you want for any area. The time consumed in an installation will be worth the results afterwards. Make sure to consider the IP ratings of lights as well to prevent fires.

About the Author